Basler A501k User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
3
3
3-2
General
The Angelo RTV-24 acquisition board is designed without compromise
for security and video surveillance applications. It's the ideal device
for PC based multiple-channel digital video recording.
This 32-bit, 33MHz/66MHz PCI bus frame grabber can capture
simultaneously four analog video streams in real time. It accepts
standard composite colors (PAL, NTSC) or monochrome video formats
(CCIR, EIA).
The resolution is programmable including square-pixel (640 x 480 or
768 x 576) and broadcast resolution. Before captured images are
transferred to the PC's memory, images can be scaled down using
available selectable ratios.
Arbitrary cropping to regions of interest is possible. The RTV-24
generates bitmaps in all popular color formats such as RGB, YUV,
planar or packed.
System integrators also benefit from a watchdog for fault-tolerant
applications and easy-to-use standard connectors.
Image Acquisition
Frame Rate: 30 full-frame images acquired per second for each
channel.
Color Image: Color video format is compatible with the following
composite video input formats: NTSC-M, NTSC-Japan, PCL-B, PAL-
D, PAL-G, PAL-H, PAL-I, PAM-M, PAL-N and SECAM
Monochrome Image: The monochrome video acquisition is compatible
with CCIR and EIA (RS-170).
Optional Scaling: The acquire images or portions of images can be
optionally scaled:
Acquisition of a programmable area of interest.
Scaling of the image. (down to 1:16)
Adjustment of hue (for NTSC signals), contrast (0 to 200%), brightness
and saturation. (0 to 200% for U and V signals)
Automatic chrominance gain control.
Introduction
Angelo RTV-24
Angelo RTV-24
4 Channels Real-time Video Capture Board for Standard Cameras
Features
Software Support
The driver's supports VC++/VB/C++ Builder/Delphi programming under Windows
98/NT/2000/XP/XPe platforms with DLL.
WDM driverWDM driverWDM driver
ViewCreator assists developers to evaluate initial tests and functions.
ViewCreatorViewCreatorViewCreator
LabVIEW driverLabVIEW driverLabVIEW driver
Four color video digitizers operating in parallel
Up to 120fps in 32-bit, 33MHz/66MHz PCI bus
Color (PAL / NTSC), monochrome (CCIR / EIA) camera
Up to 16 channels extension
On-board TTL I/O lines
Built-in watchdog timer
Protection circuit for security issue
User Friendly ViewCreator utility
Software trigger supported
Applications
PC Based Surveillance System
Digital Video Recorder (DVR)
Factory Monitoring System
Machine Vision Inspection System
Scientific Research Instrumentation
Medical Research Instrumentation
Angelo RTV-24 4-Channel real-time video capture board for standard cameras
Ordering Information
Angelo-LVIEW
Linux driverLinux driverLinux driver
Red Hat 7.3, kernel 2.4.18 above
Greyscale Camera
Color Camera
Analog
Max.
5.25V
0.80V
--
0.50V
Voltage
Input High Voltage (20µA)
Input Low Voltage (-0.2µA)
Output High Voltage (-1.0mA)
Output Low Voltage (100mA)
Min.
2.0V
0.0V
5.0V
--
RTV-E4 Extension Board (Optional)
• Channel Extension
Expandable up to 16 channels.
Channel extension interface.
10-pin ribbon cable to onboard 10-pin header
connector for channel extension. Each header
adds 4 video input channels.
Three 10-pin header connectors onboard.
I/O Lines
The Angelo RTV-24 is fitted with TTL compatible I/O lines, supporting
4 inputs, 4 outputs and 4 soft trigger lines with protection against
overloads and electrostatic discharges.
Every line maybe configured as an input or output or can be used to
trigger an acquisition or report an alarm condition.
Watchdog
A hardware watchdog is available on the Angelo RTV-24. The watchdog
is able to monitor the PC's application operation and will automatically
reset the PC after a programmable inactivity time-out. This ensures a
reliable operation of remote systems.
RTV-I4 Isolated GPIO Board (Optional)
• General Purpose I/O Lines.
All I/Os are TTL compatible and support 4 inputs,
4 outputs, and 4 soft trigger lines.
I/O interface.
Two onboard 10-pin header connectors.
The I/O lines are pulled high internally and
have the following characteristics:
Page view 2
1 2 3 4 5 6 7 8 ... 15 16

Comments to this Manuals

No comments