Basler SCOUT LIGHT User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 166
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
Physical Interface
28 Basler scout light
5.4 Cabling Requirements
5.4.1 IEEE 1394b Cable
The maximum length of the IEEE 1394b cable used between the camera and the adapter in your
PC or between the camera and a 1394b hub is 4.5 meters as specified in the IEEE 1394 standard.
Standard, 9-pin, shielded 1394b to 1394b cables should be used.
5.4.2 I/O Cable
The end of the I/O cable that connects to the camera must be terminated with a Hirose micro plug
(part number HR10A-10P-12S) or the equivalent. The cable must be wired as shown in Figure 10.
The maximum length of the I/O cable is at least 10 meters. The cable must be shielded and must
be constructed with twisted pair wire. Use of twisted pair wire is essential to ensure that input signals
are correctly received.
Close proximity to strong magnetic fields should be avoided.
The required 12-pin Hirose plug is available from Basler. Basler also offers an I/O cable assembly
that is terminated with a 12-pin Hirose plug on one end and unterminated on the other. Contact your
Basler sales representative to order connectors or standard I/O cables.
Note
The camera is backward compatible with IEEE 1394a devices. If you will be
connecting the camera to an IEEE 1394a device, you must use a conversion
cable. The cable should have a 9-pin IEEE 1394b plug on the end that
connects to the camera and a 6-pin IEEE 1394a plug on the end that connects
to the device.
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 165 166

Comments to this Manuals

No comments